Figure D.39 - Flow Allocation to Power Subsystem (Power Functional Allocation)

The elided Pin version of Figure D.38 (both the spec and Webel trail versions) show an allocation from an ObjectNode driveCurrent to the ItemFlow i1:ElectricCurrent. But the spec version of the allocation table Figure D.40 does not show this:

SysML-1.6: The allocation from ObjectNode 'driveCurrent' in Figure D.38 to itemFlow 'i1' on the Connector in Figure D.39 does not appear in the allocation table Figure D.40; Instead there is an allocation from an ObjectFlow 'o6' to the Connector 'epc-emg'

It turns out that MagicDraw/Cameo can't handle the allocation callout from ItemFlow i1 in the diagram anyway:

MagicDraw/Cameo 19SP3: Can't callout from ItemFlow on Connector, the Note handle pulls from the Connector not the ItemFlow

The explicit Pin version of Figure D.38 (the Webel trail version) show an allocation from an ObjectFlow o6 to the Connector epc-emg, consistent with the spec version of Figure D.38. But the tool does something strange with the callout for that allocation:

MagicDraw/Cameo: 19SP3: Callout of allocatedFrom on Connector vs ObjectFlow shows «decisionInputFlow» not «objectFlow» keyword

It shows correctly in the allocation table shown next

Up next

Figure D.40 - Tabular Representation of Allocation from “Accelerate” Behavior Model to Power Subsystem (Table)

Notes

[ISSUE] SysML-1.6: The allocation from ObjectNode 'driveCurrent' in Figure D.38 to itemFlow 'i1' on the Connector in Figure D.39 does not appear in the allocation table Figure D.40; Instead there is an allocation from an ObjectFlow 'o6' to the Connector 'epc-emg'

[ISSUE, TOOL] MagicDraw/Cameo 19SP3: Can't callout from ItemFlow on Connector, the Note handle pulls from the Connector not the ItemFlow

[ISSUE, TOOL] MagicDraw/Cameo: 19SP3: Callout of allocatedFrom on Connector vs ObjectFlow shows «decisionInputFlow» not «objectFlow» keyword

[DISPLAY, TIP] MagicDraw/Cameo: The display option Apply SysML Callout Style shows elements with their Metaclass or Stereotype keywords and no vendor-specific icons

[ISSUE, TIP, TOOL] MagicDraw/Cameo: HOWTO redisplay the name and type of a SysML ItemFlow on a Connector if it vanishes (such as when the Connector is redrawn)

Snippets (quotes/extracts)

[SysML-1.6] Figure D.39 depicts a subset of the PowerSubsystem, specifically showing the allocation relationships generated in Figure D.38.