11.3 Component behavior - Routing components

The following diagram shows a Block Definition Diagram (BDD) style representation of MagicDraw/Cameo SysPhSLibrary components vs the SysPhS-1.1 spec table 11.3.2.7 Routing components:

Click on the image to view it full size

There is a minor spec table error:

SysPhS-1.1: p.60: table for routing components: row for Switch: equivalents Modelica.Blocks.Logical.Switch (for Modelica) and Switch (for Simulink) missing

There is a significant "mismatch" between the anticipated Modelica and Simulink versions of the Switch:

SysPhS-1.1 (and MDSysML/Cameo 19SP3 SysPhSLibrary): Use of RealSignalInElement for Real.Routing.Switch::u2 inconsistent with BooleanInput of control port Modelica.Blocks.Logical.Switch::u2

SysPhS-1.1: Use of 'Criteria = u2~=0' for Simulink for Real.Routing.Switch::u2 inconsistent with BooleanInput of control port Modelica.Blocks.Logical.Switch::u2

On a minor matter Simulink's Threshold=0 is not represented (but it's 0 by default anyway).

Up next

11.3 Component behavior - Logical components

Notes

[ISSUE] SysPhS-1.1: p.60: table for routing components: row for Switch: equivalents Modelica.Blocks.Logical.Switch (for Modelica) and Switch (for Simulink) missing

[ISSUE, TOOL] SysPhS-1.1 (and MDSysML/Cameo 19SP3 SysPhSLibrary): Use of RealSignalInElement for Real.Routing.Switch::u2 inconsistent with BooleanInput of control port Modelica.Blocks.Logical.Switch::u2

[ISSUE, TOOL] SysPhS-1.1: Use of 'Criteria = u2~=0' for Simulink for Real.Routing.Switch::u2 inconsistent with BooleanInput of control port Modelica.Blocks.Logical.Switch::u2

Snippets (quotes/extracts)

Visit also

SysPhS-1.1

SysPhS zone (SysML Extension for Physical Interaction and Signal Flow Simulation)

Visit also (backlinks)

Related slides (includes other tutorials)

Related slides (backlinks, includes other tutorials)

Flags